Screw-retained bridge on NO-HEX Ti-Bases

1. 1Scan

   Implant-level scan body

   One per implant. T6 32895 is the short version.

   • T6 32899 Scan body · GH 2.4 mm
   • T6 32895 Short scan body · GH 2.4 mm

   Cited Catalogue 2026 PDF p. 27 (printed 26); D06.001/EN PDF p. 2, 3 (printed 2-3)

   Screw

   • T6 16000 Abutment screw

   The manual names T6 16000 with T6 32899; confirm the screw for the short T6 32895 with HealthIN.

   • SM.05 PDF p. 188 (printed 179) · Digital solutions, intraoral scanT6 16000 Abutment Screw · T6 32899 Scan Post

   Instrument

   • T0 25251 Manual HEX driver

   • SM.05 PDF p. 188 (printed 179) · Digital solutions, intraoral scanT0 25251 Hex Driver (Manua[l])

   Torque

   D013 section 15.1 step 3 (PDF p. 4) names the M1.6 screw and a HEX wrench but gives no torque. Confirm with HealthIN.

2. 2Model

   Digital implant analogue

   For a printed model. The M2 screw fixes the analogue to the model.

   • T6 32204 Digital implant analogue
   • T0 2015 Digital analogue screw M2

   Cited Catalogue 2026 PDF p. 28 (printed 27); SM.05 PDF p. 91 (printed 82)

   Screw

   • T0 2015 Digital analogue screw M2

   Model fixation only; not an implant or occlusal screw.

   • Catalogue 2026 PDF p. 28 (printed 27)
   • SM.05 PDF p. 91 (printed 82)

   Instrument

   No instrument reference is given for this step. Confirm with HealthIN.

   Torque

   Not stated in the cited IFU. Confirm with HealthIN.

3. 3Final

   CAD/CAM Ti-Base, NO-HEX

   NO-HEX references are documented for multiple-tooth restorations. Choose GH 0.7, 1.5 or 2.4 mm.

   • T6 32805 NO-HEX · GH 0.7 mm
   • T6 32824 NO-HEX · GH 1.5 mm
   • T6 32807 NO-HEX · GH 2.4 mm

   Cited Catalogue 2026 PDF p. 27 (printed 26); SM.05 PDF p. 183, 189 (printed 174, 180)

   Screw

   • T6 16000 Abutment screw

   • SM.05 PDF p. 184 (printed 175) · CAD/CAM Ti-base abutment tableAbutment Screw T6 16000

   Instrument

   • T0 25251 Manual HEX driver
   • T0 2024 Short ratchet HEX driver
   • T0 2025 Long ratchet HEX driver
   • T0 25900 Torque ratchet

   Hand-tighten with the manual HEX driver, then torque with the ratchet and a short or long ratchet HEX driver.

   • SM.05 PDF p. 203 (printed 194) · “Tightening – Torque Values” table, row “Cad/Cam Ti-Base Abutment Screws”

   Torque

   Max. 30 Ncm

   • D013 PDF p. 2 · section 7 torque table, row “CAD-CAM Ti-Base Abutment Screws”Max. 30 Ncm
   • D013 PDF p. 5 · section 15.1, step 13torqued up to a maximum of 30 Ncm
   • SM.05 PDF p. 190 (printed 181) · Bridge, step 6torqued to a maximum of 30 Ncm with a ratchet

4. 4Final

   Angled screw-channel Ti-Base, NO-HEX

   Where the design uses an angled screw channel. GH 1, 1.5 or 2.5 mm.

   • T6 32819 NO-HEX · GH 1 mm
   • T6 32826 NO-HEX · GH 1.5 mm
   • T6 32820 NO-HEX · GH 2.5 mm

   Cited Catalogue 2026 PDF p. 27 (printed 26); D06.001/EN PDF p. 8, 9, 14, 15 (printed 8-9, 14-15)

   Screw

   • T6 16011 Connection screw · GH 1 mm
   • T6 16014 Connection screw · GH 1.5 mm
   • T6 16012 Connection screw · GH 2.5 mm

   Match the GH: 1 mm → T6 16011, 1.5 mm → T6 16014, 2.5 mm → T6 16012. Not interchangeable.

   • SM.05 PDF p. 184 (printed 175) · CAD/CAM Ti-base abutment tableAbutment Screws T6 16011-T6 16014-T6 16012

   Instrument

   • T0 2027 Angled ratchet tightening instrument

   The manual calls for an angled HEX driver without a reference. The Prosthetic Driver Kit contains T0 2027. Confirm with HealthIN.

   • SM.05 PDF p. 193 (printed 184) · Total edentulism with CAD/CAM Ti-Base, step 5tightened with the angled hex driver

   Torque

   Sources differ

   • Max. 30 Ncm D013 PDF p. 2 · section 7 torque table, row “CAD-CAM Ti-Base Abutment Screws”Max. 30 Ncm
   • Max. 25 Ncm SM.05 PDF p. 193 (printed 184) · Total edentulism with CAD/CAM Ti-Base, step 6angled ti-base abutments must be torqued to a maximum of 25 Ncm

   Confirm with HealthIN before tightening.

https://nucleoss.co.uk/labs/workflow-sheets/bridge-no-hex-ti-base/ Sources checked 11 October 2026