For dental laboratories and dentists
Printable workflow sheets
One A4 page per restoration: the parts chain in order with exact references, the screw and instrument for each part, and tightening torque quoted from the manufacturer’s IFU.
Each value cites its document code, edition and PDF page. Where the sources say nothing, or disagree, the sheet says Confirm with HealthIN instead of giving a value. These sheets are a reference, not a clinical recommendation; sources checked 11 October 2026.
-
Single crown, digital workflow, implant level
Single screw-retained crown on a CAD/CAM Ti-Base
Scan body, digital analogue and a HEX CAD/CAM Ti-Base with its abutment screw, driver and IFU torque.
-
Bridge direct to implants, digital workflow
Screw-retained bridge on NO-HEX Ti-Bases
NO-HEX straight or angled screw-channel Ti-Bases for a connected bridge, with matched screws, drivers and IFU torque.
-
Full-arch or multi-unit bridge, digital workflow
Full arch on multi-unit abutments
NO-HEX multi-unit abutments (0°, 17°, 30°), scan post or ScanWings, multi-unit analogue and Ti-Base with occlusal screw.
-
Crown or bridge cemented on a straight or angled abutment
Cement-retained restoration, conventional impression
Open- or closed-tray implant impression post, implant analogue and a straight, 15° or 25° titanium abutment.
-
Healing phase before the restoration
Healing: cover screws and gingiva formers
Cover screws by implant diameter, cylindrical, platform-switch, PEEK and Ti-Base gingiva formers.
-
Removable overdenture
Overdenture on ball or Equator® abutments
Ball abutment with impression post, analogue and retention parts, or Equator® abutment with housing and caps.